|
|
|
GENERAL EXTERIOR MAINTENANCE
Wash with Boatwash Concentrate (Part #501) &Wash Mitt (Part # 525). Use
Concentrated Marine Cleaner (Part # 707) on stubborn stains, decks, transoms
and engine room clean-ups. Dry exterior with Dry Plus Chamois (Part #55 I).
VINYL (CUSHIONS, COAMING, ETC.)
Clean dirt and mildew with Concentrated Marine Cleaner (Part # 707). Dry
completely with Dry Plus Chamois (Part #551) and apply Marine Vinyl &
SoftTop Dressing (Part # 401) with Wax Applicator (Part # 250).
GLASS & ENCLOSURES (CLEAR VINYLS)
Wash with Boatwash Concentrate (Part # 501) & Wash Mitt (Part #525). Dry
with Dry Plus Chamois (Part # 551). Apply Glass Cleaner & Protectant (Part #
701) with cotton cloth for U.V Protection & Water Repellency
NOTE: For hard water spots on glass windows, use Water Spot Remover for
Glass (Part # 801) with an orbital buffer or by hand with Wax Applicator
(Part # 250).
STAINLESS STEEL & CHROME
Use Aluminum & Stainless Polish (Part # 301) or Ultra High Gloss Polish
(part # 601). For excessive surface rust use Polishing Compound (Part # 606)
with Wax Applicator (Part # 250).
ANODIZED ALUMINUM
New: Use Ultra High Gloss Polish (Part # 601) with Wax Applicator (Part #
250) or Aluminum & Stainless Polish (Part # 301). Wipe clean with soft
cotton cloth. Oxidized pipe: Use Buff & Cut Compound (Part # 616) or
Polishing Compound (Part # 606) with Wax Applicator (Part # 250).
GELCOAT AND PAINTED SURFACES
Heavy oxidation: Use Buff & Cut Compound (Part # 616) and Buffer with
Compounding Pad (Part # 101). Follow with Ultra High Gloss Polish (Part
#601) by hand or with a buffer & Polishing Pad (Part # 101P). For mild
oxidation: Use Polishing Compound (Part # 606) with Compounding Pad (Part #
101) or by hand with Wax Applicator (Part # 250). Follow with Ultra High
Gloss Polish (Part # 601) or Fiberglass Polish & Cleaner (part # 201), by
hand or with a buffer and Polishing Pad (Part # 101P).
NOTE: It is recommended that a high speed buffer (I800-2000 Rpm's) be used
for compounding Gelcoat and Paint for best results.
CANVAS FABRICS, COVERS, ETC.
Remove (whenever possible) and clean fabric according to manufacturers
specifications. Allow to dry completely Apply Water Repellent (Part # 450)
by spraying onto surface until damp. Allow to dry completely before washing
or wetting surface.
|
|
