Buff & Cut Compound – Heavy Oxidation Remover

Aquatech Buff & Cut Compound is built for the serious work: heavy oxidation, deep scratches, and chalky, faded gelcoat that won't come back with ordinary polish. The water-soluble formula stays active longer than traditional compounds when used with a mist spray, giving you real working time at machine-buffing speeds. Used correctly, it brings neglected hulls back to life.

What it does

• Removes heavy oxidation, chalking, and deep surface scratches from gelcoat and paint

• Water-soluble formula extends buffing time when used with a mist spray

• Restores clarity and smoothness to neglected marine surfaces

• Designed for machine buffing at 2,200–2,500 RPM with a wool or foam cutting pad

• Compatible with OEM mold surfaces for production and prep work

• Pairs with Ultra High Gloss Polish for a full cut-polish-finish sequence

Specifications

How to use

1. Wash the surface thoroughly and mask adjacent areas.

2. Apply compound with a brush or wax applicator to a 2–3 sq ft section.

3. Mist with water (or Aquatech mist) to extend working time, especially in sunlight.

4. Buff with a wool cutting pad at 2,200–2,500 RPM in overlapping passes.

5. Wipe off residue with a clean microfiber cloth.

6. Follow with Aquatech Polishing Compound, then Ultra High Gloss Polish for a full restoration.

Pairs with

Use with an Aquatech Wool Buffing Pad on a Backing Plate. Follow with Aquatech Polishing Compound and Ultra High Gloss Polish for full three-step restoration.

Good to know

• Not a one-step product — designed for paint correction workflows

• For light oxidation only, skip this and start with Polishing Compound

• Water-soluble — cleans up with soap and water

• Always test on an inconspicuous area first